OLT refers to the Optical Line Critical which is the critical device used to connect the fiber central source (FBB). OLT provides TDM and Ethernet program between the internet and MAN for the access network. It attaches with each ONT through the optical distribution network...
↧
FiberOpticNetWork - OLT, the core of the PON system
↧
FiberOpticNetWork - The 10G SFP+ modules which mould to the trend of market
In the 10G optical transceiver module, SFP+ has a minimum volume and low power consumption, which in line with the mainstream trend of market.
10G fiber optic transceiver is one of the key components of the storage network (such as 4G...
10G fiber optic transceiver is one of the key components of the storage network (such as 4G...
↧
↧
FiberOpticNetWork - It takes to use the SOPTO OLT/ONU fiber optic transceiver in twos
SOPTO OLT/ONU fiber optic transceivers fulfill the IEEE 802. 3ah-2004 standards and fulfill the demand of different systems.
Using the SOPTO OLT/ONU in twos...
Using the SOPTO OLT/ONU in twos...
↧
FiberOpticNetWork - The successful application of 10G EPON
From the development of urban optical network point of view, the 10G EPON FTTH preliminary project achieved remarkable results. It not only handles the smooth upgrade problem of “City optic network”, but also improves the bandwidth ability of...
↧
amt.tee's Blog - From: CISCO SECURITY VS VOICE
Hi All,
I am a CCNA certified from Bangalore.I just want to turn my career into cisco security or voice.....Please advice me with your valuable suggestions and reasons behind that.
Thanks in advance
Amit
Source:...
I am a CCNA certified from Bangalore.I just want to turn my career into cisco security or voice.....Please advice me with your valuable suggestions and reasons behind that.
Thanks in advance
Amit
Source:...
↧
↧
SLCCNA's Blog - because I want some helps
DRSEnt OSPF/ACL PT Practice SBA
A few things to keep in mind while completing this activity:
Do not use the browser Back button or close or reload any exam windows during the exam.
Do not close Packet Tracer when you are done. It will close automatically.
Click the Submit Assessment button to submit...
A few things to keep in mind while completing this activity:
Do not use the browser Back button or close or reload any exam windows during the exam.
Do not close Packet Tracer when you are done. It will close automatically.
Click the Submit Assessment button to submit...
↧
vithobha's Blog - How to ping ip dslam which is in other subnet
Hi,
I want to ping ip dslam which is in other subnet
connection is like this
MyPc-----Rj45----------Adsl2+ Modem---------Rj11-------Dslam
192.168.1.4---192.168.1.1---172.80.1.3-------------172.80.1.2
------------------Lanside----------Wanside-----------------------
Modem is set to Static Ip Address Encapsulation.
If you require further details...
I want to ping ip dslam which is in other subnet
connection is like this
MyPc-----Rj45----------Adsl2+ Modem---------Rj11-------Dslam
192.168.1.4---192.168.1.1---172.80.1.3-------------172.80.1.2
------------------Lanside----------Wanside-----------------------
Modem is set to Static Ip Address Encapsulation.
If you require further details...
↧
vithobha's Blog - Could not open IPV6 addr on web browser
Hi,
I have ipv6 address fe80::21f:a4ff:fe91:2e44%4. This is the address of modem/router.
I am unable to open this address in browser to view the web configuration. I am able to telnet to fe80::21f:a4ff:fe91:2e44%4, view the console UI & can do settings.
I can also open 192.168.1.1(IPv4 address of modem/router) in browser.
I tried...
I have ipv6 address fe80::21f:a4ff:fe91:2e44%4. This is the address of modem/router.
I am unable to open this address in browser to view the web configuration. I am able to telnet to fe80::21f:a4ff:fe91:2e44%4, view the console UI & can do settings.
I can also open 192.168.1.1(IPv4 address of modem/router) in browser.
I tried...
↧
Priya Gerald's Blog - Java certification
Hi
I am planning to do the Java developer certification so, if any one has sample questions, I would like to have them.
I am planning to do the Java developer certification so, if any one has sample questions, I would like to have them.
↧
↧
Ben10005's Blog - Access server cisco 2511
I have run into multiple issues while trying to setup the access server. Its a cisco 2511, I have done some basic configurations and I am able to telnet to my router R1. The problem is I cant go back to the access server. I have tried ctrl+shift+6-X. I think I am missing something on R1 that will allow it to terminate the telnet session. Anyone...
↧
Jagdish Joshi - Cisco Vs Checkpoint
Hi request immediate guidance.
I was planning to do CCIE security course and I am a beginner hence will start from CCNA (basics). I was told that I shouldn't be doing CCIE rather I should go for Checkpoint certifications. I am unable to decide on the same.
Kindly suggest which one is better and has a good scope.
Thanks in advance
I was planning to do CCIE security course and I am a beginner hence will start from CCNA (basics). I was told that I shouldn't be doing CCIE rather I should go for Checkpoint certifications. I am unable to decide on the same.
Kindly suggest which one is better and has a good scope.
Thanks in advance
↧
CCIE Voice Partner - CCIE Voice Partner
Hi, this is Azmatullah from Hyderabad, I want some serious partners who want to crack the CCIE Voice Lab, anyone interested, please let me know, my Email ID azmathullah77@gmail.com.
If you are in Hyderabad we can have a meeting once.
Best of Luck for All the CCIE Aspirants.
Thank you & Best Regards
If you are in Hyderabad we can have a meeting once.
Best of Luck for All the CCIE Aspirants.
Thank you & Best Regards
↧
rocky5's Blog - Horrible 642-813 experience
appeared for 642-813 today. absolutely horrific experience I had
AAAdot1x Lab
1. copy runn start does not work
2. "match ip address 10" does not work, although "match ?" shows ip, "match ip ?" shows address and "match ip address ?" shows acl number....
3. wr does not work
4. 43 questions
5. I could...
AAAdot1x Lab
1. copy runn start does not work
2. "match ip address 10" does not work, although "match ?" shows ip, "match ip ?" shows address and "match ip address ?" shows acl number....
3. wr does not work
4. 43 questions
5. I could...
↧
↧
PaaNii's Blog - IP SLA Config
Hello Gurus,
Please I have two ISP routers ( ISP 1 and ISP 2) on site, and i introduced a third Router to configure IP SLA, directly connected. Its working but I feel there's more to the configs as INTERNET access is slow and WAN connectivity is also flapping . What is the simplest config apart from what you kindly find...
Please I have two ISP routers ( ISP 1 and ISP 2) on site, and i introduced a third Router to configure IP SLA, directly connected. Its working but I feel there's more to the configs as INTERNET access is slow and WAN connectivity is also flapping . What is the simplest config apart from what you kindly find...
↧
CCIE Exam Policies - CCIE Exam Policies
CCIE Exam
Candidates must make an initial attempt of the CCIE lab exam within 18 months of passing the CCIE written exam. Candidates who do not pass must reattempt the lab exam within 12 months of their last scored attempt in order for their written exam to remain valid. If a candidate does not pass the lab exam within three years of...
Candidates must make an initial attempt of the CCIE lab exam within 18 months of passing the CCIE written exam. Candidates who do not pass must reattempt the lab exam within 12 months of their last scored attempt in order for their written exam to remain valid. If a candidate does not pass the lab exam within three years of...
↧
PaaNii's Blog - EDGE ROUTER FAILOVER CONFIG
Hi, we are an ISP with two main STM providers, we tried to configure fail-over on our edge router but it didn't work. please can any one assist.
thank you
thank you
↧
Priya Gerald's Blog - Java certification
Hi
I am planning to do the Java developer certification so, if any one has sample questions, I would like to have them.
I am planning to do the Java developer certification so, if any one has sample questions, I would like to have them.
↧
↧
Ben10005's Blog - Access server cisco 2511
I have run into multiple issues while trying to setup the access server. Its a cisco 2511, I have done some basic configurations and I am able to telnet to my router R1. The problem is I cant go back to the access server. I have tried ctrl+shift+6-X. I think I am missing something on R1 that will allow it to terminate the telnet session. Anyone...
↧
Jagdish Joshi - Cisco Vs Checkpoint
Hi request immediate guidance.
I was planning to do CCIE security course and I am a beginner hence will start from CCNA (basics). I was told that I shouldn't be doing CCIE rather I should go for Checkpoint certifications. I am unable to decide on the same.
Kindly suggest which one is better and has a good scope.
Thanks in advance
I was planning to do CCIE security course and I am a beginner hence will start from CCNA (basics). I was told that I shouldn't be doing CCIE rather I should go for Checkpoint certifications. I am unable to decide on the same.
Kindly suggest which one is better and has a good scope.
Thanks in advance
↧
CCIE Voice Partner - CCIE Voice Partner
Hi, this is Azmatullah from Hyderabad, I want some serious partners who want to crack the CCIE Voice Lab, anyone interested, please let me know, my Email ID azmathullah77@gmail.com.
If you are in Hyderabad we can have a meeting once.
Best of Luck for All the CCIE Aspirants.
Thank you & Best Regards
If you are in Hyderabad we can have a meeting once.
Best of Luck for All the CCIE Aspirants.
Thank you & Best Regards
↧